technical data sheet rpc-2.40 right angle jack pcb 09K243-40ME3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 1 rf_35/08.06/4.0 all dimensions are in mm; tole rances according to iso 2768 m-h interface mechanically compatible with rpc-1.85 documents pcb layout b 208 material and plating connector parts material plating center contact beryllium copper gold, min. 1.27 m, over chemical nickel outer contact brass gold, min. 0.8 m, over chemical nickel dielectric 1 peek dielectric 2 ptfe screws stainless steel
technical data sheet rpc-2.40 right angle jack pcb 09K243-40ME3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/08.06/4.0 f(ghz) electrical data impedance 50 frequency dc to 50 ghz return loss 12 db, dc to 50 ghz insertion loss 0.1 x db insulation resistance 5 g center contact resistance 4.0 m outer contact resistance 2.5 m test voltage 500 v rms working voltage 150 v rms rf-leakage 100 db up to 1 ghz - return loss in application depends decisive on pcb layout - mechanical data mating cycles 500 center contact captivation 20 n coupling test torque 1.65 nm recommended torque 0.80 nm to 1.10 nm environmental data temperature range -40c to +85c thermal shock iec 61169-1, subclause 9.4.4 corrosion iec 61169-1, subclause 9.4.6 vibration iec 61169-1, subclause 9.3.3 shock iec 61169-1, subclause 9.3.14 moisture resistance iec 61169-1, subclause 9.4.3 max. soldering temperature ie c 61760-1, +260c for 10 sec. 2002/95/ec (rohs) compliant tooling n/a suitable cables n/a packing standard 50 pcs in blister weight 4.7 g/pce draft date approved date rev. engineering change number name date herbert babinger 05/09/06 armin maiw?lder 05/09/06 a00 04-0130 herbert babinger 05/09/06 while the information has been carefully compiled to the best of our knowled g e, nothin g is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe exis ting patents. in the effort to improve ou r products, we reserve the right to make changes judged to be necessary.
|
